3/8/2024 0 Comments Ping loopback whyPlatform: cisco WS-C4506-E, Capabilities: Router Switch IGMP Sh cdp neigh table from the access switch O - ODR, P - periodic downloaded static route Ia - IS-IS inter area, * - candidate default, U - per-user static route I - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ![]() N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2Į1 - OSPF external type 1, E2 - OSPF external type 2 I checked the VTP status and this is running as Transparent mode switch.īelow is the show ip route from 10.55.1.42:Ĭodes: C - connected, S - static, R - RIP, M - mobile, B - BGPĭ - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area ![]() and no routing is taking place for this access switch. The switch I have taken for testing is not running any eigrp in it. I have gone through the access switches (3750) but few are running eigrp on it and few switches are not running any eigrp. Redistribute static metric 56 1 255 1 1500 Interface IP-Address OK? Method Status Protocol Route metric is 0, traffic share count is 1 Reply is coming from the IP 10.55.1.42 which is the core2 vlan 1 ip and core 1 vlan1 ip is 10.55.1.41Īdvertised by eigrp 10 metric 56 1 255 1 1500 Reply from 10.55.1.42: TTL expired in transit. Please have the configuration and routing information for your reference and kindly suggest. I think i need to add network stmt in the eigrp command. I think I need to modify routing on the core switches, but as this is the production network i really don't want to mess up. I am getting message from the command prompt as shown below when i ping from the desktop machine. For testing I used one of the access switch which has less users connected/no users connected using the IP address 10.55.54.1 255.255.255.255 on the access switch and we are running eigrp process on the core switches, but when i ping for testing from core to access switch no response. we would like to manage with the loopback IP address. here is the scenereo, we are having access switches (3750E and 3750G) of 40 count uplink to 2 core switches (4506). We would like to manage the network through the loopback IP address. ![]() I am stuck in middle of the configuration for managing the devices through loopback IP addresses.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |